Johnson County · 76050
Fence Company in Grandview, TX
Pipe and ranch fencing, cattle guards, entry gates, cedar privacy fence and outdoor living structures across Grandview and the surrounding Johnson County farmland.
- Based in Alvarado — about 15 minutes south
- Licensed & insured
- Free on-site measure
Your local fence and outdoor living contractor in Grandview
Grandview is farm and ranch country, fifteen minutes south of our Alvarado shop, and the fencing needs reflect that. Long boundary runs, cross-fencing to rotate pasture, cattle guards at the entrance, and gates wide and strong enough for equipment.
Working fence is a different discipline from residential. It has to hold stock, absorb a tree limb in a spring storm, and stay tight across uneven ground for decades with minimal attention. That comes down almost entirely to how the corners and brace assemblies are built.
Areas we cover in and around Grandview:
Grandview town centre · I-35W corridor · FM 916 · FM 917 · Surrounding farmland toward Alvarado, Itasca and Venus
Local Knowledge
What building in Grandview actually involves
Corners and braces built first
On a long fence, the corners carry everything. If the corner and H-brace assemblies are undersized or set shallow, the whole run goes slack within a couple of seasons no matter how well the line posts were driven.
We drill and concrete corner and brace assemblies before any line fence goes up, weld rather than clamp our pipe connections, and size the whole structure to the stock it has to hold and the terrain it crosses.
- Drilled and concreted corner assemblies
- Welded, not clamped, pipe connections
- Line spacing matched to terrain
- Built for the stock you actually run
Ranch entries, cattle guards and gates
The entry is the part of a ranch everyone sees. We weld entry arches, set cattle guards on poured footings sized for loaded equipment, and hang gates on posts heavy enough to carry them without sagging by the second summer.
Custom ironwork — ranch brands, family names, cut silhouettes and Texas stars — is fabricated in our own shop in Alvarado rather than ordered from a catalogue.
- Welded entry arches and headers
- Cattle guards on poured footings
- Heavy gates on properly sized posts
- Custom brands and ironwork fabricated in-house
The house at the centre of the place
Working fence out at the line and the area right around the house are two different jobs, and they usually get handled by two different companies. We do both — pipe on the perimeter, cedar privacy around the yard, a drive gate between them, and a deck or pavilion where the family actually spends its evenings.
One contract, one crew, one schedule, and a stain colour that matches from the gate to the pergola.
- Perimeter and homestead in one contract
- Cedar yard fence and drive gates
- Decks, pergolas and patio covers
- Matched stain across the whole property
Services in Grandview
Everything we build for Grandview properties
Each of these is available across Grandview and the wider Johnson County area. Follow any link for materials, detailing and pricing guidance.
Cedar & Wood Fences in Grandview
Board-on-board and horizontal cedar privacy fencing, posts set in concrete and stained to last.
Learn more
Iron & Aluminum Fencing in Grandview
Powder-coated aluminum and welded iron for pool codes, front boundaries and open views.
Learn more
Custom & Automatic Gates in Grandview
Swing, slide and cantilever drive gates with custom cutouts, ironwork and full automation.
Learn more
Precast Concrete Fence in Grandview
Steel-reinforced privacy walls that block road noise and never need staining or replacing.
Learn moreFarm & Ranch Fencing in Grandview
Welded pipe, continuous panel, cattle guards and cross-fencing for acreage and livestock.
Learn more
Commercial Fencing in Grandview
Boundary fence, screening walls, dumpster enclosures and access-controlled gates.
Learn more
Custom Decks in Grandview
Cedar, treated and composite decks with cable, horizontal or picket railing systems.
Learn more
Pergolas & Pavilions in Grandview
Open pergolas and fully roofed pavilions engineered for North Texas wind and sun.
Learn more
Patio Covers in Grandview
Gable and shed covers with cedar beams and tongue-and-groove ceilings, matched to your roof.
Learn more
Outdoor Kitchens in Grandview
Built-in grill islands, bar seating and stone counters under proper shade.
Learn more
Fence Repair & Staining in Grandview
Post resets, storm damage rebuilds and professional wash, brighten and re-stain.
Learn moreWhy Grandview Calls Us
A local crew, not a call centre
Genuinely local
Our shop is in Alvarado — about 15 minutes south. We answer callbacks and small repairs, not just the big installs.
Measured, not estimated
Every Grandview quote comes from a tape on your property line and a written scope you can hold us to.
Licensed & insured
General liability and workers compensation in force, with certificates available for your HOA or GC.
Tear-out included
Old fence, old post concrete and every scrap of debris leaves with us. Your yard is left clean.
Free Estimate
Get your Grandview project priced
Four short steps. We follow up within one business day to book your on-site measure in Grandview.
Call or text
682-456-8200Our shop
9820 County Road 514
Alvarado, TX 76009
Free Estimate in Grandview
Four quick steps. No pressure, no obligation — just a straight answer and a fair number.
Questions
Grandview homeowners ask us
Do you build fence on large acreage around Grandview?
Yes, regularly. Boundary fence, cross-fencing, pipe and continuous panel, cattle guards and entry gates on properties from a few acres to several hundred. Tell us the acreage and rough perimeter and we can give you a working budget before we come out.
What is the difference between pipe fence and continuous panel?
Pipe fence is welded together on site from individual pipe — the strongest and most custom option, and the most expensive. Continuous panel is pre-fabricated multi-rail sections joined end to end — quicker to install and easy to reconfigure. Many properties use pipe on the frontage and pens and panel down the boundary lines.
Do you install cattle guards?
Yes, set on poured footings sized for the equipment that will actually cross them, with wing walls and approach detailing so the guard does not silt up or settle out of level.
Can you do custom ironwork for a ranch entry?
We fabricate ranch brands, family names, cut silhouettes, Texas stars and scrollwork in our own shop in Alvarado, then powder coat and install them. Bring us a sketch or a photo and we will work from it.
Nearby
We also build in these cities
Ready to get your Grandview project measured?
Free on-site estimate, a written price and a crew based fifteen minutes from most of Johnson County.